Energier essential Inverter charger combination offers two working modes: Normal (ON at main
switch) and Power Save, of which you can set through both switch on equipment LCD control panel or
through RCC.
In Power Save mode, the no load power consumption will be reduced by approx 70%. Energier
essential Inverter charger combination will switch off in case of load less than 0.5% of the rated power
and will switch on every 10 seconds. If the load exceeded the threshold level of 1% of the rated power,
the inverter will resume output.
Features, -Equalization charging program was available
-Compatible with majority of cheap generators in the market
-Designed to work with weak grid
-Can be applied for power backup and solar hybrid system
-High performance designed for all kinds of home appliances
-Designed for tropical region with working temperature up to 60℃
-Optional CM was available for automatic generator start
-Dry contacts
-Optional SNMP card for remote internet access
-Bi directional inverter with pure sine wave output
-TBB premium II multi stage charging algorithm with built in
-automatic temperature compensation
LCD Control Panel
Specification| Model No. | 12Vdc | CS0625L | CS1040L | CS2080L | | |
| | 24Vdc | CS0615M | CS1020M | CS2040M | CS3060M | CS4080M |
| | 48Vdc | | | | CS3030S | CS4040S |
| INVERTER |
| Nominal Voltage | 12Vdc, 24Vdc, 48Vdc |
| power 30mins @25℃ (W) | 600 | 1000 | 2000 | 3000 | 4000 |
| Cont.power@25℃ (W) | 600 | 1000 | 1800 | 2500 | 3600 |
| Cont.power@40℃ (W) | 600 | 1000 | 1500 | 2000 | 3000 |
| Cos φ | 0.9-1 |
| Surge | 300% |
| Output voltage【1】 | 230VAC or 110VAC ± 2% | 230VAC ± 2% |
| Output frequency | 50Hz or 60Hz ± 0.1% |
| Efficiency (MAX.) | 12Vdc | 88% |
| | 24Vdc | 88% |
| | 48Vdc | 92% |
Bypass
range | UPS mode | 184VAC-264VAC/92VAC-132VAC | 184VAC-264VAC |
| | GEN mode | 160VAC-280VAC/80VAC-140VAC | 160VAC-280VAC |
| Crest factor | 3:1 |
| THD | <3% |
| Zero load power | 17 | 22 | 27 | 36 | 62 |
| Zero load power (power save mode) | 4 | 5 | 7 | 9 | 15 |
| Output circuit breaker | 5A | 10A | 15A | 30A | 30A |
| Overheat protection | auto disconnect |
| Overload protection | auto disconnect |
| shortcut protection | auto disconnect |
| Charger |
| Nominal Output Voltage | 12Vdc, 24Vdc, 48Vdc |
| Max Output current (A) - adjustable | 25/15 | 40/20 | 80/40 | 60/30 | 80/40 |
| AC Input range | UPS mode | 184VAC - 264VAC/92VAC-132VAC | 184VAC - 264VAC |
| | GEN mode | 160VAC - 280VAC/80VAC-140VAC | 160VAC - 280VAC |
| Battery types | AGM / GEL / LFP / Flooded |
| Absorption time | variable |
| Temperature compensation | -4mV/℃/cell |
| Charger circuit breaker | 5A | 10A | 15A | 30A | 30A |
| Other Data |
| Transfer time | UPS mode | 15ms |
| | GEN mode | 2s |
| Transfer switch | 40A |
| Battery connector | M8 x 2 |
| AC connector | Terminal block (M3 screw) |
| Mechanical Data |
| Enclosure | Steel with powder paint |
| Dimension (mm) | 444x186x135 | 512x216x176 |
| Net Weight (kgs) | 9.5 | 14 | 16 | 18.5 | 22.5 |
| Cooling | Forced fan |
| Protection | IP20 |
| Standard |
| Safety | EN60950-1 |
| EMC | EN55022,EN55024 |
| 【1】Output voltage: 220VAC/60Hz for Philippines |
